| Part |
Price |
| Rudder assembely |
$365.00 |
| Tiller, laminated light and dark wood |
$69.00 |
| Tiller, teak, unfinished |
$50.00 |
| Tiller extension, with holding clamp |
$32.00 |
| Rudder pin with rings |
$15.00 |
| Fabricated aluminum rudder head, only |
$195.00 |
| Fiberglass rudder blade, only |
$175.00 |
| Transom pintles, each |
$22.00 |
| Transom pintles, w/long arms |
$44.00 |
| Replacement rudder gudgeons, each, for new style
rudder heads |
$18.00 |
| Fiberglass centerboard |
$295.00 |
| Centerboard hangers, aluminum, per pair |
$48.00 |
| Replacement centerboard gasket, Mylar &
Dacron laminate |
$28.00 |
| Set of aluminum centerboard gasket trim pieces
|
$32.00 |
| Elvstrom style rectangular self-bailer (new
large or super medium) |
$94.00 |
| Replacement gasket for Elvstrom Bailer |
$13.00 |
| Hiking strap webbing (20'), black, 2" wide
|
$26.00 |
| Clamp, for securing ends of hiking strap webbing,
each |
$5.00 |
| Anchorage, for attaching hiking straps to boat,
each |
$4.00 |
| Inspection port 4-1/4" diameter, plastic,
two piece |
$12.50 |
| Inspection port 6" Diameter, plastic, two
piece |
$14.00 |
| Mast, extrusion only, with masthead fitting
and sail entry groove |
$395.00 |
| Mast, complete with hardware (no wires or halyard)
|
$540.00 |
| Mast step, new style, with engaging pin
|
$47.00 |
| Shroud, each |
$44.00 |
| Stay adjuster, with clevis pins and rings |
$9.00 |
| Main halyard, wire, with rope tail and shackle
|
$34.00 |
| Wire block for jib halyard |
$13.00 |
| Jib halyard, wire, with rope tail (no swivel)
|
$27.00 |
| Safety forestay, with mast tang, and adjuster
|
$44.00 |
| Upper swivel unit, for jib furling |
$82.00 |
| Lower furling drum for jib, with furling line
|
$114.00 |
| Lever, for tensioning jib halyard |
$52.00 |
| Magic box for tensioning jib halyard |
$126.00 |
| Boom, complete except for mainsheet block(s)
|
$265.00 |
| Fiddle blocks for mainsheet on boom |
$42.00 |
| Boom casting for gooseneck end of boom (new
boom) |
$15.00 |
| Replacement stainless tack pin only |
$9.00 |
| Mainsail, with bag and battens, standard sail
|
$415.00 |
| Jib, sleeve design (for Chrysler boats), standard
sail |
$260.00 |
| Jib, wire luff design |
$270.00 |
| Window, in main or jib, extra |
$40.00 |
| Racing sail, North, includes window and numbers
|
$810.00 |
| Racing jib, wire luff, North, includes window
|
$470.00 |
| Battens, fiberglass, each (specify length needed)
|
$9.00 |
| Spinnaker, specify choice of colors, standard
sail |
$525.00 |
| Racing spinnaker, North, specify choice of colors
|
$770.00 |
| Spinnaker pole |
$125.00 |
| Other spinnaker gear, (lines, cleats, block)
|
$195.00 |
| Boom vang |
$85.00 |
| Hull drain plug assembly |
$10.00 |
| Boat cover, for trailing and/or mooring |
$365.00 |
| Jib sleeve cover |
$84.00 |
| Outboard bracket, to fit reverse transom of
these boats |
$105.00 |
| Replacement lower furling spool for sleeve type
jib |
$34.00 |
| Stainless steel deck grommet for forestay to
replace they plastic one |
$11.00 |
| Rubber cockpit drain plug |
$5.00 |
| Replacement masthead sheave, each |
$7.00 |
| Replacement top section of centerboard trunk,
fiberglass |
$215.00 |
| Flanged 90 Degree snout for chute lancher, fiberglass
|
$195.00 |
| Fiberglass centerboard trunk cap, doubles as
seat for crew |
$125.00 |
